Your building site, calculated from column to quote
Design to BAEL 91 or Eurocode 2: take-offs, logistics and costing follow, with nothing typed twice.
Calculation report · Column P4
BAEL 91One input, the whole site
Every calculation in the workshop feeds the take-off. The take-off feeds logistics, costing and the budget. Nothing is entered twice.
Workshop
Column, footing, slab: sized and justified.
Take-off
Quantities for each level, carried over from the workshop.
Logistics
Sand and gravel truckloads, trucks, blocks, water.
Cost
Bags, truckloads, bundles: what you buy, at your prices.
Budget
Direct cost, overheads, contingencies, margin and VAT.
Documents
Calculation reports, take-offs, site reports: Word, Excel, PDF.
Where other tools estimate, BÉTONIQ PRO designs
No ratio pulled out of thin air: the actual section, standard commercial reinforcement and the code check, compared with the profession's reference methods.
- Load take-down
- Pad footing
- Strip footing
- Column and buckling
- Beam in bending
- Staircase
- One-way or two-way slab
- Retaining wall
289 calculation sheets, 13 disciplines
A design office's calculations, with their codes: BAEL, Eurocodes 2 and 3, RPA, CM66, Fascicule 62.
Reinforced concrete (EC2)
- EC2 column (buckling, creep, reinforcement layers)
- Slab punching shear
- Complete pad footing (BAEL)
- Deep beam
- Solid slab on four supports
Geotechnics
- Pile bearing capacity (pressuremeter method)
- Footing settlement
- Active and passive earth pressure coefficients (Caquot-Kérisel)
Quick pre-design
- Load take-down
- Pad footing
- Staircase
Structural mechanics
- Continuous beam (three-moment method)
- Deflection of a uniformly loaded span
- Portal frame
Section analysis
- N-M interaction diagram
- Arbitrary section at ULS
- Moment of inertia of a cracked T-section
Technical appendices
Steel structures
Seismic (RPA)
Bracing
Finishes
Composite steel-concrete
Prestressed concrete
Bridges and civil structures
Documents ready to hand over
Produced by the calculation itself, under your company letterhead, with your units, currency and prices.
- WordCalculation reportInputs, calculation steps, results and checks, under your letterhead.
- ExcelQuantity take-offDimensions, formulas and a summary for each level.
- ExcelCost and direct costYour editable prices, amounts and recalculated totals.
- WordReports, contracts, lettersSite reports, inspection sheets, CSTB forms.
- PDFEvery pagePrinted on A4, with header and page numbers.
Pricing
7-day full trial, no credit card. Pay by Mobile Money or card.
Starter
5,000 FCFA / month
or 50,000 FCFA / year, 2 months free
- 56 essential calculation sheets
- Project take-off, logistics, cost and budget
- Site documents and Word, Excel, PDF exports
Pro
20,000 FCFA / month
or 200,000 FCFA / year, 2 months free
- 166 calculation sheets (Eurocode 2, sections, cracking…)
- Everything in Starter, plus the Gantt schedule per level
- Company workspace: one shared subscription
Enterprise
60,000 FCFA / month
or 600,000 FCFA / year, 2 months free
- All 289 sheets (geotechnics, RPA seismic, steel…)
- Everything in Pro, up to 7 accounts in the company
- For design offices and general contractors